Pneumatic Rod Seal size chart
Pneumatic rod seal standard sizes are following..
Image | Name | ID | OD | TH | Type | Material | Price |
|---|---|---|---|---|---|---|---|
 | 32 | 42 | 11.2 | Pneumatic Rod Seal | PU | ||
| 35 | 45 | 11.2 | Pneumatic Rod Seal | PU | ||
| 40 | 50 | 11.2 | Pneumatic Rod Seal | PU | ||
| 45 | 55 | 12.2 | Pneumatic Rod Seal | PU | ||
| 50 | 60 | 12.2 | Pneumatic Rod Seal | PU | ||
| 63 | 75 | 13 | Pneumatic Rod Seal | PU |
Pneumatic Rod Seal
Single acting pneumatic rod seal ring is a two-way dust-proof dual use sealing ring. This type of sealing ring is used for the sealing of cylinder piston rod, which has both dust-proof and fixed functions.
Advantages
- Superior sealing effect.
- Low friction values and high length of operation.
- The geometry of the sealing lip maintains initial lubrication and therefore has excellent friction characteristics.
- Wide range of dimensions
- Minimal space requirement
- ?Easy installation to open grooves.
- Highly wear resistant.
Operating Conditions
- Material: PU
- Temperature: -35C to 100C
- Speed: up to 1 m/s
- Medium: Air.
- Pressure: up to 1.6Mpa
- Colour: Blue
- Hardness: 88 to 92A shore
Installation
It can be assembled into closed groove with tight hand force. This seal does not need additional element such as circlip for axial fitting within the housing. We recommend using special assembly tool. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil. All our seals are packed and sealed at the point of manufacture to ensure the highest quality. They are stored out of sunlight and kept in a temperature controlled environment until dispatch.
For more information, you can visit here..
