ROD SEAL :
Rod seal is the most critical seal on any type of fluid power equipment. It prevents leakage of fluid from the cylinder to the outside. In addition, it has two sealing lips. Therefore, an additional lubrication is maintained in the sealing gap due to the action of the two sealing lips. At the same time , it prevents the entry of contaminations from the wiper side.
ROD SEAL SIZE CHART :
ID | OD | TH |
---|---|---|
16 | 24 | 5.8 |
20 | 28 | 5.7 |
20 | 30 | 7.3 |
22 | 30 | 5.7 |
22 | 45 | 7.3 |
25 | 33 | 5.7 |
25 | 35 | 7.3 |
28 | 36 | 5.7 |
28 | 38 | 7.3 |
30 | 38 | 5.7 |
30 | 40 | 7.3 |
32 | 40 | 5.8 |
32 | 42 | 7.3 |
35 | 43 | 5.7 |
35 | 45 | 7.3 |
36 | 46 | 7.3 |
40 | 48 | 5.7 |
40 | 50 | 7.3 |
40 | 50 | 8 |
40 | 50 | 10 |
45 | 55 | 7.3 |
45 | 55 | 10 |
50 | 60 | 7.3 |
50 | 60 | 10 |
50 | 65 | 11.5 |
55 | 65 | 7.3 |
55 | 70 | 11.5 |
56 | 71 | 11.5 |
60 | 70 | 7.3 |
60 | 70 | 11.5 |
60 | 73 | 10 |
60 | 75 | 11.5 |
63 | 78 | 11.5 |
65 | 75 | 11.5 |
70 | 205 | 12 |
70 | 85 | 11.5 |
75 | 90 | 12 |
80 | 95 | 11.5 |
80 | 100 | 12 |
85 | 100 | 12 |
90 | 105 | 11.5 |
100 | 120 | 12 |
100 | 120 | 15 |
105 | 125 | 12 |
110 | 125 | 12 |
110 | 130 | 15 |
120 | 140 | 15 |
125 | 145 | 15 |
130 | 150 | 15 |
140 | 160 | 15 |
150 | 170 | 15 |
160 | 180 | 15 |
180 | 200 | 15 |
200 | 220 | 15 |
220 | 250 | 18 |
Contact Us to buy PU Hydraulic Seals…
ADVANTAGES :
- High wear resistance.
- Superior sealing effect with the secondary lip.
- Secondary sealing lip provides extra protection against the ingress of dirt particles Wide range of dimensions.
- Simple groove design.
- Easy assembly into closed grooves.
OPERATING CONDITIONS :
Material | PU |
Temperature | -35C to +110C |
Speed | up to 1 m/s |
Medium | Water, Gas, Oil, Chemicals |
Press | up to 400 Bar |
Colour | Blue, Green |
Hardness | 70 to 90A shore |
APPLICATION:
Construction machinery, fork-lift trucks, injection moulding machines, agricultural machinery, loading platforms and standard cylinders.
INSTALLATION :
It fits easily in closed grooves according to the sizes chart. Therefore You should use special assembly tools during installation. But, It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.
Showing 1–9 of 53 results