Hydraulic Wiper Seal
Hydraulic wiper seals ensure that dirt, dust particles and moisture are not introduced into the hydraulic cylinder. Hydraulic cylinders operate in different environmental conditions. So, dirt, dust particles and moisture may cause significant damage to the rod, cylinder wall, seals, and other components.
Wiper seal design (Double lip)
The design of double lip wiper seal is such that it reliably wipes off the dirt from surface of piston rod. In addition, it leaves a residual oil film on the rod. Its structure makes it excellent in dust resistance and less oil leakage.
Wiper seal material
Wiper seals material is Polyurethane (PU). Polyurethane is a special material that offers the resilience of rubber combined with the toughness and durableness. In fact it allows people to substitute rubber, plastic with PU.
Polyurethane can reduce factory maintenance and OEM product cost. Polyurethane has better abrasion and tear resistance than rubbers, and offering higher load bearing capacity.
Advantages
- Good wiping effect.
- Wide range of dimensions.
- No twisting in the housing.
- Wiper lip reliably wipes away dirt and leaves a residual oil film on the retracting rod.
- Double lip makes additional protection to prevent the particles to enter into the cylinder.
- Easy installation.
Application of Wiper seal
Construction machinery, fork-lift trucks, injection moulding machines, mining machines, agricultural machinery and standard cylinders.
Operating conditions
- Material: Polyurethane (PU)
- Temperature: -35C to 10oC
- Speed: up to 1 m/s
- Medium: Hydraulic oils
- Pressure: up to 31.5MPA
- Colour: Blue
- Hardness: 90 – 95 shore A
Installation of Wiper seal
It fits easily into the closed housing by deforming into a kidney shape. But, It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the wiper must be oiled with system oil.
UNITED ELASTOMER
Hydraulic & Pneumatic Seals Importer
Wiper Seal standard size chart (Double lip)
Double lip wiper seal standard sizes are following :
 | Double Lip Wiper Seal 30x38x5/6.5 has two sealing lips, one oil seal lip and one dust lip. | |
| Double Lip Wiper Seal 31.5x39.5x5/6.5 has two sealing lips, one oil seal lip and one dust lip. | |
| Double Lip Wiper Seal 32x40x5/6.5 has two sealing lips, one oil seal lip and one dust lip. | |
| Double Lip Wiper Seal 35x43x5/6.5 has two sealing lips, one oil seal lip and one dust lip. | |
| Double Lip Wiper Seal 35.5x43.5x5/6.5 has two sealing lips, one oil seal lip and one dust lip. | |
| Double Lip Wiper Seal 36x44x5/6.5 has two sealing lips, one oil seal lip and one dust lip. | |
| Double Lip Wiper Seal 40x48x5/6.5 has two sealing lips, one oil seal lip and one dust lip. | |
| Double Lip Wiper Seal 38x46x5/6.5 has two sealing lips, one oil seal lip and one dust lip. | |
| Double Lip Wiper Seal 45x53x5/6.5 has two sealing lips, one oil seal lip and one dust lip. | |
| Double Lip Wiper Seal 50x58x5/6.5 has two sealing lips, one oil seal lip and one dust lip. |
Notes
This seal should be used in combination of suitable rod seals to avoid hydrodynamic pressure or pressure relieving bore between seal and wiper should be constructed to prevent the build up pressures.
Our indiamart link : United Elastomer
Equivalent KASTAS Product code: K27
Equivalent HALLITE Product code: H839
